Submerged Arc Furnace Material Handing System Furnace Auxiliary Equipment Submerged Arc Furnace Material Handing System Furnace Auxiliary Equipment


                    

Product Description

Material Handing System


Material Handing System Used for Submerged Arc Furnace

The Material Handing System(MHS) is an important part of metallurgical equipment such as EAF, refining furnace, and submerged arc furnace (SAF), responsible for accurately and efficiently delivering raw materials (scrap, ferroalloys, slag-forming materials, etc.) into the furnace according to process requirements.

Core Equipment Classification of Material Handing System

Bin Storage & Conveying System: Bins are used to store various raw materials, divided by function into high-level bins, intermediate bins, weighing bins, etc.

Equipment NameSpecificationsDescription
High‑level BinVolume: 10–30 m³
Quantity: based on raw material types (e.g., 15 bins)
Located at the high charging floor; material flows by gravity. Equipped with ultrasonic level meter (low level alarm typically set at 15%).
Weighing HopperVolume: 1.0–2.0 m³
Weighing range: 0–2000 kg
Quantity: 2–3 units (for different bin groups)
Uses compression load cells for weighing; accumulates multiple materials.
Emergency HopperVolume: same as weighing hopperUsed to empty the weighing hopper under abnormal conditions.
Intermediate HopperVolume: determined by processLocated below the weighing hopper; temporarily stores the batched material before feeding into the furnace.

Feeding Equipment: Vibratory Feeder,Electromagnetic Vibratory Feeder,Disc Feeder and Screw Feeder.

Equipment NameSpecificationsDescription
Vibratory FeederFeed rate: adjustable
Control: high/low speed dual‑speed control (with speed change point)
Enables fast/slow feeding for higher weighing accuracy. Requires compensation for "drop weight" after stopping.
Electromagnetic Vibratory FeederFeed particle size: 0–50 mm
Control accuracy: ±1‑2%
No rotating parts, easy maintenance; suitable for granular materials.
Disc FeederDisc diameter: φ1000–2000 mmSuitable for sticky materials; provides uniform feed.
Screw FeederDiameter: φ100–400 mm
Length: determined by process
Suitable for powdery materials; enclosed conveying.

Conveying Equipment: Belt Conveyor,Bucket Elevator and Pneumatic Conveying System.

Equipment NameSpecificationsDescription
Belt ConveyorBelt width: 500–1200 mm
Belt speed: 0.8–2.0 m/s
Capacity: 50–500 t/h
Suitable for continuous conveying; allows multi‑point discharge.
Bucket ElevatorLifting height: 10–50 m
Capacity: 10–200 t/h
Vertical lifting of materials; small footprint.
Pneumatic Conveying SystemConveying distance: ≤500 m
Capacity: 5–50 t/h
Air source pressure: 0.4–0.6 MPa
Enclosed conveying, dust‑free; suitable for powdery materials.

Furnace Front Charging Equipment: Charging & Stoking Machine is specialized equipment for open and semi-closed submerged arc furnaces, with both charging and stoking functions, enabling uniform distribution, eliminating hanging materials, and reducing crust formation in the furnace.

ClassificationTypeDescription
By FunctionSingle‑function Charging MachineCharging only.
Stoking MachineStoking and leveling only.
Multi‑function Charging & Stoking MachineCombines charging, stoking, and pushing.
By Travel ModeStraight Rail TypeTravels on straight rails; commonly used in small/medium‑sized domestic Si‑Fe furnaces (three machines per furnace).
Circular Rail TypeTravels on circular rails.
Trackless Free‑moving TypeTire‑type travel, flexible and maneuverable; widely used in large foreign furnaces (one machine can handle three material surfaces).


0
Inquire for more cooperation or product information.
We will contact you within 1 working day, please check your email.
Submerged Arc Furnace Material Handing System Furnace Auxiliary Equipment Submerged Arc Furnace Material Handing System Furnace Auxiliary Equipment
Name
Mail
Mobile phone (Optional)
Message
Send

NewSite

We reply immediately
Welcome to our website. Ask us anything 🎉

Start Chat with: