Positive Pressure Dust Collector System Industrial Baghouse Dust Collector Positive Pressure Dust Collector System Industrial Baghouse Dust Collector


                    

Product Description

Positive Pressure Baghouse Dust Collection System

1. Definition & Working Principle

Positive pressure dust collection system refers to the configuration where the fan is installed before the dust collector. The fan pushes the dust-laden flue gas into the dust collector, where the gas is filtered through filter bags under positive pressure, and the purified gas is directly discharged or sent for subsequent treatment. The fan pushes dust-laden flue gas under positive pressure into the dust collector. As gas passes through the filter bags, dust is trapped, and purified gas is discharged from the top.

2. Advantages:

  • Compared with negative pressure filtration reverse blowing cleaning, equipment weight is 20% lighter
  • Initial investment is reduced by 20%
  • Low system resistance, fan power consumption saves 10%
  • "Three-state combined" cleaning technology completely solves secondary adsorption
  • PLC control with simulation panel display and LCD Chinese character display

"Three-state combined" cleaning technology: filtration, reverse suction, and settling

3. HB Series SAF Dedicated Baghouse Parameters

HB series positive pressure large baghouse dust collector is a mature product specially developed for SAF, adopting positive pressure working mode and "three-state combined" cleaning technology.


ParameterSpecification RangeDescription
Air Flow Rate90,000 - 360,000 m³/hSuitable for 12,500-33,000 kVA submerged arc furnaces
Filtration Area3,600 - 12,000 m²Configured based on air flow rate, filtration velocity <0.5 m/min
Number of Chambers6 - 20 chambersChamber design, online maintenance possible
Filter Bag Specificationφ250 × 7,420 mmLong bag design, small footprint
Equipment Resistance600 - 1,600 PaLow operating resistance, good energy saving effect
Filtration Velocity< 0.5 m/minLow velocity design, extends bag life
Working ModePositive pressureFan is located before the dust collector
4. Positive Pressure Selection Scenarios
ScenarioDescription
Small and Medium SAF12500-25000kVA SAF, limited investment budget
Limited InvestmentNeed to reduce initial equipment investment
Operating Cost is not sufficentLong-term operation, sensitive to power consumption
Microsillicon Powder RecyclePositive pressure system with double-stage cyclone pre-separator, high SiO₂ recovery rate
Limited Land AreaRetrofit projects with space constraints
5. Detailed Advantages & Disadvantages Comparison
Evaluation DimensionPositive Pressure Large BaghouseNegative Pressure Large Baghouse
Investment★★★★★ Lower (20% lighter)★★★★ Higher (20% heavier)
Operation Cost★★★★★ Lower (10% power saving)★★★★ Higher (higher resistance)
Maintenance★★★★ Good (online maintenance)★★★★★ Excellent (simple fan maintenance)
Equipment Reliability★★★★ Good (valves are key components)★★★★★ Excellent (fan in clean environment)
Cleaning Effect★★★★★ Excellent (three-state combined)★★★★★ Excellent (powerful pulse cleaning)
Fan Maintenance★★★ Average (blades require cleaning)★★★★★ Excellent (no fan wear)
Applicable ScenarioSmall to medium SAF (<25000kVA)All SAF sizes


0
Inquire for more cooperation or product information.
We will contact you within 1 working day, please check your email.
Positive Pressure Dust Collector System Industrial Baghouse Dust Collector Positive Pressure Dust Collector System Industrial Baghouse Dust Collector
Name
Mail
Mobile phone (Optional)
Message
Send

NewSite

We reply immediately
Welcome to our website. Ask us anything 🎉

Start Chat with: