Negative Pressure Baghouse Dust Collection 180000m3/H Bag House Dust Collector Negative Pressure Baghouse Dust Collection 180000m3/H Bag House Dust Collector


                    

Product Description

Negative Pressure Baghouse Dust Collection System

1. Definition & Working Principle

Negative pressure dust collection system refers to the configuration where the fan is installed after the dust collector. The fan sucks the dust-laden flue gas through the dust collector, where filtration occurs under negative pressure, and the purified gas is pushed by the fan into the chimney for discharge.

The fan creates negative pressure inside the dust collector, drawing in dust-laden gas for filtration; purified gas is discharged through the fan.

2. JDDM Series Long-Bag Low-Pressure Pulse Dust Collector Parameters

JDDM series negative pressure pulse dust collector is the mainstream equipment for SAF flue gas purification, adopting long-bag low-pressure pulse technology.


ParameterSpecification Range
Air Flow RateCustomized according to SAF capacity, can reach over 180,000 m³/h
Filtration AreaHalf of glass fiber baghouse filtration area, over 4,000 m²
Filter Bag Specificationφ130-160 * 6000-7000 mm
Equipment Weight50% lighter than traditional glass fiber baghouse
Filtration VelocityAbout 1.0 m/min, twice that of glass fiber filter material
Equipment Resistance<2,000 Pa (design value about 1,500 Pa)
Working ModeNegative Pressure, the fan is installed after the dust collector

3. Advantages
  • Low investment - filtration area is half of glass fiber baghouse, equipment weight 50% lighter
  • Small footprint - filtration velocity doubled, equipment volume significantly reduced
  • Excellent cleaning effect - large submerged straight-through pulse valve, injection pressure up to 2000Pa
  • Convenient maintenance - top cover structure, bags can be replaced by removing the top cover
  • Long bag life - new composite filter material lasts 18-24 months (glass fiber only 8-12 months)
  • Stable fan operation - fan operates in clean air environment, blades require no cleaning
  • Long pulse valve life - diaphragm service life up to 1 million cycles
  • 4. Negative Pressure Selection Scenarios
Application ScenarioDescription
Large SAFLarge SAF above 25000kVA, large flue gas volume
Strict Environment RequiremnetStrict emission standards, need stable compliance
High automationHigh automation requirement, reduced manual maintenance
Fan maintenance is difficultSites where fan maintenance is difficult
Large new projectsLarge new projects with sufficient investment and long-term reliability focus

5. System Comparison Table

Comparison ItemPositive Pressure Large BaghouseNegative Pressure Large Baghouse
Fan PositionBefore dust collector (upstream)After dust collector (downstream)
Collector StatePositive pressureNegative pressure
Fan EnvironmentDust-laden air environment, blades prone to wearClean air environment, blades require no maintenance
Equipment WeightBaseline (100%)About 20% heavier than positive pressure
Equipment InvestmentBaseline (100%)About 20% higher than positive pressure
Operating EnergyBaseline (100%)About 10% higher than positive pressure
Cleaning MethodPositive pressure reverse suction / three-state combinedNegative pressure pulse cleaning
Filter Bag Life18-24 months (new composite)18-24 months (new composite)
Site AreaSmall (long bag design)Small (long bag design)
AutomationPLC control with simulation displayPLC control, DCS integrable


0
Inquire for more cooperation or product information.
We will contact you within 1 working day, please check your email.
Negative Pressure Baghouse Dust Collection 180000m3/H Bag House Dust Collector Negative Pressure Baghouse Dust Collection 180000m3/H Bag House Dust Collector
Name
Mail
Mobile phone (Optional)
Message
Send

NewSite

We reply immediately
Welcome to our website. Ask us anything 🎉

Start Chat with: