Medium Scale Electric Arc Furnace Steelmaking 30T - 70T EAF Furnace Medium Scale Electric Arc Furnace Steelmaking 30T - 70T EAF Furnace


                    

Product Description

Medium-Scale Electric Arc Furnace (30t - 70t)


The 30-70 ton electric arc furnace (EAF) represents the most versatile and widely used class of steelmaking furnaces in modern mini-mills and specialty steel plants. Offering an optimal balance between production capacity, capital investment, and operational flexibility, this furnace class is particularly popular among steelmakers producing a diverse range of steel grades for regional markets.

The 30-70 ton electric arc furnace is the workhorse of the modern mini-mill steel industry. It serves as the core melting unit for many small to medium-sized steel plants around the world. Its popularity stems from its ability to balance production output with operational flexibility and investment cost.

This is the most common type for general steel production, suitable for carbon steel, low-alloy steel, and some special steel grades.

Medium furnaces are predominantly High Power (HP) or Ultra-High Power (UHP). They balance production efficiency and operational cost, making them a popular choice for steelmakers with flexible production needs.

I. Definition and Power Level Classification

Medium-scale electric arc furnaces (30-70 tons) are typically categorized into three power levels based on the transformer capacity allocated per ton of steel capacity. Power levels directly determine melting efficiency and production rate.

Power Level Classification for 30-70 Ton EAFs:


Power Level30t Furnace50t Furnace70t Furnace
Regular Power (RP)< 600 kVA/t< 500 kVA/t< 428 kVA/t
High Power (HP)600-699 kVA/t500-599 kVA/t428-569 kVA/t
Ultra-High Power (UHP)≥ 700 kVA/t≥ 600 kVA/t≥ 570 kVA/t

II. Key Technical Features and Modern Upgrades

Modern medium-scale EAFs are distinguished by a range of technological advancements that significantly improve efficiency, reduce costs, and enhance operational flexibility. The table below summarizes these key features and their benefits.


FeatureDescription
High Impedance TechnologyIncorporates a series reactor in the main circuit to increase circuit impedance. This allows for stable long-arc operation at higher secondary voltages and lower currents, improving arc stability and power efficiency.
Eccentric Bottom Tapping (EBT)Standard on most modern 30-70t furnaces. EBT allows for slag-free tapping, enabling clean steel production and the retention of a hot heel for the next heat, which improves yield and reduces energy consumption.
Water-Cooled Furnace Body and CoverEmploys tubular or panel-type water cooling systems on the upper shell and roof to withstand intense arc radiation, greatly extending refractory life and enabling UHP operation.
Copper-Steel Composite Conductive ArmsReplaces traditional copper arms with a composite design, reducing weight, improving conductivity, and lowering maintenance costs.
PLC-Based Automatic Control SystemElectrode regulation, furnace tilting, and cover lifting/rotation are fully hydraulically operated and controlled by a PLC with an HMI, allowing for precise, automated process control.
Optimized Short Network DesignEnergy-efficient short network configuration minimizes reactance and electrical losses, improving power transfer to the furnace.

III. Applications and Steel Grades

Medium-scale EAFs are known for their flexibility and can produce a wide range of steel grades.


ApplicationSpecific Steel Grades
Carbon SteelsCarbon structural steel, high-quality carbon steel
Alloy SteelsAlloy structural steel, spring steel, gear steel
Stainless SteelsAustenitic, ferritic, and martensitic stainless steels
Specialty SteelsTool steel, bearing steel, electrical steel
Long ProductsRebar, wire rod, sections, rails
Flat ProductsHeavy plate, sheet (in integrated mills with downstream casting)

IV. Selection Recommendations

When selecting a 30-70 ton EAF for your steelmaking operation, consider the following:


Consideration FactorRecommendation
Product MixWide product mix (carbon + alloy + stainless) → Standard AC UHP/HP; Single product or special steel → DC or High Impedance AC
Raw Materials100% scrap → Consider scrap preheating (Consteel) or continuous feeding; High DRI/HBI ratio → Requires robust power supply and chemical energy system
Production CapacityTarget >300,000 tpy → UHP (≥600 kVA/t) with 60-70t furnace; Lower capacity → HP furnace (50t)
Automation LevelBasic automation with PLC and HMI is standard; For advanced process optimization, invest in Level 2 process control and AI-based electrode regulation
Environmental ComplianceEnsure dedusting system (baghouse) is correctly sized for the furnace capacity (typically 400,000-800,000 m³/h for this range)
Power SupplyStrong grid connection → Standard AC; Weak grid / need for low flicker → DC or High Impedance AC with SVC/SVG
Investment BudgetLower budget → HP AC furnace with EBT; Higher budget → UHP furnace with advanced automation and chemical energy package

V. Summary

The medium-scale electric arc furnace (30-70 tons) represents the backbone of the modern mini-mill steel industry, offering an optimal combination of production capacity, flexibility, and capital efficiency. Key takeaways for potential buyers include:

  1. Power Level Choice: Higher power (UHP) directly translates to faster tap-to-tap times and increased productivity, but requires a more robust power supply and appropriate auxiliary systems.
  2. Core Technologies: EBT, water-cooled panels, and PLC-based automation are standard on modern furnaces and are essential for efficient, safe operation.
  3. Flexibility: This furnace class is capable of producing a wide range of steel grades, from common carbon steels to high-alloy stainless steels, making it ideal for market-oriented steel producers.
  4. Total Cost of Ownership: Beyond initial capital cost, consider operational parameters such as electrode and refractory consumption, power consumption (kWh/t), and maintenance requirements.
  5. Modernization Potential: Many older 30-70t furnaces can be upgraded with new technologies (e.g., high impedance design, advanced automation) to significantly improve performance and extend service life.


0
Inquire for more cooperation or product information.
We will contact you within 1 working day, please check your email.
Medium Scale Electric Arc Furnace Steelmaking 30T - 70T EAF Furnace Medium Scale Electric Arc Furnace Steelmaking 30T - 70T EAF Furnace
Name
Mail
Mobile phone (Optional)
Message
Send

NewSite

We reply immediately
Welcome to our website. Ask us anything 🎉

Start Chat with: